Dr. Schutz SuperBond Primer

Dr. Schutz Super Bond Primer 

PRODUCT DESCRIPTION Bonding primer for non-porous siliceous substrates, such as ceramic tiles, polished stone surfaces (e.g. granite), as well as glass and metal surfaces, before coating with Dr. Schutz PU Sealer/Wax No More, PU Anti-color / Mark no more or PU Color / Colorize. – Solvent-free – Easy to use – Does not form a film. 2 AREAS OF APPLICATION Suitable for all kinds of silicate-based stone surfaces (e.g. granite), glazed ceramic tiles, as well as glass and metal surfaces. 3 APPLICATION Thinly apply Super Bond evenly onto the properly strip-cleaned and dry surface with a clean Polish Applicator, or with a Quick-Step mop or with a dry Dr Schutz Aqua top roller (minimum temp. 15°C). Hereby it must be ensured that the entire area is moistened with a closed, wet film! Please note: – Remnants of cement, separating agents and loose particles must be completely removed. The surface to be primed must be entirely free of dirt and organic adhesions (e.g. lacquer, care products, cleaning agents, fat, wax). For this purpose clean thoroughly with Clean & Strip, Turbo Strip, or Inolit Aktive Powder and rinse carefully with clear water afterwards. We recommend using a mono disc machine (150 rpm) with PU Renovation pad. – Floor and material temperature must not fall below +15°C during application and drying time. – The technical rules are to be observed. 4 CONSUMPTION Approx. 20-30 ml/m² (30-50 m²/l). 5 DRYING TIME Can be carefully walked on and worked on further after about 1 hour (at 20°C, 50% relative air humidity and sufficient ventilation). It is essential to check that drying is complete, especially in the area of joints! The area must be coated directly after drying! An extended period between drying and sealing reduces surface activation. Low temperatures, high humidity and poor ventilation can prolong the drying time.

Colour Swatches

Suitable for

  • All types of silicate-based stone surfaces (e.g. granite)
  • Glazed ceramic tiles
  • Glass surfaces
  • Metal surfaces
  • Solvent free
  • Easy to use
  • Does not form a film
  • Remnants of cement, separating agents and loose particles must be completely removed prior to priming. 
  • Surface to be primed must be entirely free of dirt and organic adhesions (lacquer, care products, cleaning agents, fat, wax). 
  • Use Dr. Schutz Clean & Strip or Dr. Schutz Turbo Strip.  We recommend using a Monodisc machine (150 rpm) with PU Renovation pad. 
  • Rinse thoroughly with clear water afterwards.  
  • Allow to dry thoroughly before applying primer
  • Floor and material temperature must not fall below 15°C during application and drying time
  • Thinly apply SuperBond evenly onto properly strip-cleaned and dry surface with a clean Polish Applicator, a QuickStep mop or with a new, dry Dr. Schutz Aquatop Roller
  • Ensure entire area is moistened with a SuperBond film

Consumption:

Approx. 20-30 ml/m² (30-50 m²/l).

Curing:

  • Can be carefully walked on and worked on further after 1 hour (at 20°C, 50% relative humidity and sufficient ventilation)
  • It is essential to check that drying is complete especially in joint areas.
  • Area must be coated directly after drying
  • An extended period between drying and sealing reduces the surface activation
  • Lower temperatures, higher humidity and insufficient ventilation can prolong the drying time.

Equipment cleaning:

Working tools and implements can be cleaned with water

 

Dr. Schutz Instructions for Preparation of Resilient Floors

Dr. Schutz Instructions for Preparation of Subsurfaces

Contained substances: water, non-volatile organosilanes.
voc (g/l) <1 (ISO11890) / 2004/42/IIA(i)(140)140.
ADR/RID: not a dangerous good as defined by transport regulations.
CLP: labelling not necessary.
Even when using low-polluting products the usual technical safety measures are to be observed. Keep out of the
reach of children. Emptied canisters can be disposed of in household waste, or taken to a recycling centre.

 

Download Dr. Schutz SuperBond Data Sheet

  • Store in a cool, dry place
  • Will keep for 6 months from date of manufacture in unopened, original container
  • Keep out of reach of children

Gallery

Commercial Project?

Scroll to Top