BERGO ELITE is a solid tile which can be used to create a setting in just a few moments and is both elegant and functional at the same time. Elite has been laid in many countries and in every imaginable environment and climate. Exceptional performance indoors and out. Due to the uniform interlocking system, Elite can be combined with open patterned designs to create an individual look. For increased comfort and sound absorption, an underlay is recommended.
- Garages & Sheds
- Storage Areas
- Decks, Patios & Balconies
- Covered Outdoor Learning Areas (COLA’s)
- Exhibition Areas e.g. Trade shows/fairs
- Easy installation – no nails, screws or glue required
- Easily moved for transportable applications
- UV Stable and withstands all climates and environments
- Temperate underfoot – reduces heat intensity in direct sunlight *
- Indoor and outdoor applications
- Rejuvenation of worn areas
- Robust and Durable
- Aesthetically attractive
- Good colour range
- Good drainage and ventilation capabilities
- Ergonomic – easy on your back and joints
- Backed by 10-year manufacturer’s warranty
- Made from environmentally friendly recyclable PP-composite (polypropylene)
- No emissions (PVC free)
*due to the solid design, this depends on the colour
With regular care of your Bergo floor according to the recommendations, you will extend the lifetime, colour and lustre.
Bergo’s multifunctional floor tiles are made from the best materials available in the market. They offer the highest possible colour stability and UV protection. Taking care of the tiles regularly extends the lifetime and lustre of your floor.
Cleaning – Indoors - Bergo flooring installed in an indoor environment should be cleaned as often as visually required with traditional cleaning equipment such as a vacuum cleaner and wet mop using a *cleaning agent. Where the floor has not been cleaned for some time, the substrate can be uncovered, cleaned with suitable cleaning agent and equipment and then tiles replaced in original positions. To easily uncover the substrate, use the Disassembly Tool to split flooring into smaller sheets for easy lifting and quicker re-laying.
Cleaning – Outdoors – Dirt particles spread by wind and weather will end up on your Bergo floor as well. To keep your floor clean, we recommend regular mopping with a *cleaning agent and rinsing with a hose. A high-pressure washer is preferable if you have access to one. If the flooring is extremely dirty or it has been a long time since it was cleaned, we recommend using a stronger detergent combined with a rotating brush, scrubbing machine and rinsed off with a hose.
* Cleaning agent - Most cleaning agents can be used to remove dirt. Some are especially suited for composites, and these are recommended. In extremely dry environments such as indoors, the detergent should contain an antistatic agent which minimizes the risk of static electricity. Bergo’s products can withstand most chemicals. For more information, see the ”Chemical Resistance Table” for PP. Consult your dealer about the recommended media for best results on PP plastic
Edge Strip: 376 mm x 55 mm, for a quality and safe finish.
Corner Piece: 55 mm x 55 mm
Cable Strip: 376 mm x 55 mm - for cable concealment
Joint Strip: – 379mm x 2.8mm:
Cable Cross-Piece: 55 mm x 55 mm
BERGO SUPREME can be installed on concrete, timber or ceramic surfaces.
Before installing your flooring, allow tiles to remain a few hours in the room where the floor is to be laid, to produce equal temperatures.
There is no need for glue or special tools when laying your new Bergo floor. All you require is a rubber mallet, tape measure and a jigsaw/circular saw for cutting tiles in around edges and fixtures.
1. Start in one corner: see picture. Remember always to turn the protruding rings in the same direction (forwards).
2. Adjust tiles with pins over the protruding rings and interlock with sharp strokes of a rubber mallet.
If you wish to conceal cables, Cable Strip can be used (up to 6mm) Can also be used just for decoration.
For a neat and quality finish to edges, doorways and steps, Edge Strip and Corner Pieces can be used.
To ensure best functioning, always install a Bergo floor on a clean, hard and even surface. Allow between 5mm and 10mm from walls, doorsteps etc. if the flooring is likely to be exposed to varying temperatures.
- 100% environmentally friendly recyclable PE-composite
- UV/Colour Stabilised
- No emissions – PVC free
Tile Size: 377.2 mm x 377.2 mm (builds to 380 mm x 380 mm)
Tile Thickness: 10.2 mm
Weight Loading: 350 ton/m²