Dr. Schutz Clean & Strip

Dr. Schutz Clean & Strip is a mild but effective cleaning agent for cleaning and stripping both newly installed and heavily soiled vinyl, linoleum, rubber and resin floors.

Clean & Strip removes the remains of old care products, stubborn stains and adhesive residue and is the ideal counterpart to Dr. Schutz PU Sealer, creating a clean and hygienic base over which the sealer can be effectively applied.

Colour Swatches

For use on a wide variety of floor types including:

  • Linoleum
  • Luxury vinyl tiles (LVT)
  • Resin
  • Rubber  
  • Vinyl

 

Dr. Schutz Product Matrix

  • Highly effective floor stripper and cleaner
  • Removes even the most stubborn dirt from care products and adhesive residue
  • Gentle with low PH value – particularly suitable for linoleum and rubber flooring
  • NTA-free*
  • Easy to apply

*Nitrilotriacetic acid

Cleaning:

  • Remove coarse dirt with broom or vacuum cleaner
  • Dilute Clean & Strip with water in a ratio of between 1:5 and 1:10 – adjust solution strength depending on dirt levels 
  • Can be used undiluted where particularly stubborn residues are present (e.g. in the commercial sector) 
  • Apply cleaning solution to floor area, distribute and allow to stand for approx. 10 minutes.
  • Clean floor surface using a scrubber, Padmaster System or Monodisc SRP (+ suitable pad or scrubbing brush)
  • Take up loosened dirt with a Spray Extractor with hard floor adaptor or rubber blade and absorbent wide-headed mop
  • Mop floor with clear water until completely clean.

Stripping:

  • Remove coarse dirt with a broom or vacuum cleaner
  • For domestic use – dilute Clean & Strip in ratio 1:5 with water
  • For commercial use – either use undiluted or dilute Clean & Strip in ratio of up to 1:3 (depending on resistance of protective film and dirt levels)
  • Spray floor with clear water before use if necessary
  • Apply cleaning solution to floor area, distribute and allow to stand for approx. 15-20 minutes.
  • Clean floor surface using a scrubber, Padmaster System or Monodisc SRP (+ suitable pad or scrubbing brush)
  • Take up loosened dirt with a Spray Extractor with hard floor adaptor or rubber blade and absorbent wide-headed mop
  • Mop floor with clear water until completely clean.

Note:

Ensure you work in manageable sections and you should not allow Clean and Strip to dry on the floor. 

Before stripping test sensitive floor coverings (e.g. Rubber) in an inconspicuous spot to ensure colour and material suitability.  If necessary, dilute Clean & Strip even more and apply several times using shorter standing times.  

Wear rubber gloves 

Ensure the room being cleaned is well ventilated.

Do not allow cleaning solution to get on to sensitive surfaces such as wood, metal, varnished surfaces

Consumption:

Cleaning :  1 l = 10 – 30 m²
Stripping:  1 l = 30 – 50 m² (domestic use) and / or 1 l = 6- 10 m² (commercial use, undiluted)

 

Dr. Schutz Instructions for Preparation of Resilient Floors

Dr. Schutz Instructions for Preparation of Subsurfaces

Data on ingredients (EC recommendation): Less than 5% anionic surfactants, less than 5% non-ionic surfactants,
less than 5% NTA, less than 5% phosphates. Other ingredients: Solvents, process materials and aromas.
Product code for cleaning and care products (Giscode): GG 20
pH: approx. 10:0 (concentrate)
ADR/RID: not a dangerous good as defined by transport regulations.
CLP: The product is not classified according to the CLP regulation.
Completely emptied canisters can be disposed of in domestic waste, or taken to a recycling centre.

 

Download Dr. Schutz Clean & Strip Safety Data

  • Clean & Strip should be stored in a cool, dry place in its sealed original container.  
  • Keep out of reach of children

Gallery

Commercial Project?

Scroll to Top